Now you can set a Target Range for objectives.
Here's how it works:
Create your objective and follow these steps:
In Target Value choose change to range
Set Start Value - this is where progress calculation begins. This must be outside Target Range range.
Set Graph Range Low - this is the low on the graph.
Set Graph Range High - this is the high on the graph.
Standard Graph Example
Inverted Graph Example
With an inverted graph the numbers can becoming a little confusing. Remember that the Graph Range Low and Range High are based on the the Graph, not the value.
Therefore, with an inverted graph, the Graph Range Low is the higher number and the Start Value is a higher number still, as shown below.
